AZ920资料

AZ920ULTRA-SENSITIVE

SUBMINIATURE RELAY

FEATURES

•Extremely small footprint utilizing only 0.16 square inchof PCB area

•Thin vertical profile only 0.2\" wide•Slim SIP package

•1 Form A contact with up to 5 Amp switching capability•High sensitivity, 58 mW pickup

•Dielectric strength 2500 Vrms contact to coil•Epoxy sealed

•UL, CUR file E43203•TÜV file R50018790CONTACTS

ArrangementRatings

SPST (1 Form A)

Single button contact or bifurcatedResistive load:

Max. switched power: 150 W or 1250 VAMax. switched current: 5 A

Max. switched voltage:150* VDC or 250 VAC

*Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory.

GENERAL DATA

Life Expectancy

MechanicalElectricalOperate Time (typical)Release Time (typical)

Minimum operations20 million operations

1 X 105at 5 A, 30 VDC or 250 VAC6 ms at nominal coil voltage3 ms at nominal coil voltage(with no coil suppression)

Dielectric Strength1000 Vrms between open contacts(at sea level for 1 min.)2500 Vrms contact to coilInsulationResistanceDropout

Ambient Temperature

OperatingStorageVibrationShockEnclosureTerminals

Max. Solder Temp.Max. Solder TimeMax. Solvent Temp.

1000 megohms min. at 20°C, 500 VDC,50% RH

Greater than 10% of nominal coil voltageAt nominal coil voltage

-40°C (-40°F) to 85°C (185°F)-40°C (-40°F) to 105°C (221°F)0.062\" (1.5 mm) DA at 10–55 Hz15 g

P.B.T. polyester

Tinned copper alloy, P.C.270°C (518°F)5 seconds80°C (176°F)30 seconds3 grams

100 per plastic tube / 1000 per carton box

Rated LoadUL, CUR

5 A at 30 VDC or 250 VAC General Use, 100k cycles [1]

5 A at 30 VDC or 250 VAC Resistive, 100k cycles [1]3 A at 30 VDC or 250 VAC General Use, 75k cycles[2]3 A at 30 VDC or 250 VAC Resistive, 75k cycles [2]

[1] Single button contacts[2] Bifurcated contacts

TÜV

Material

Silver nickel (single button or bifurcated contacts),or silver tin oxide (single button contacts),gold plating available< 50 milliohms initially

Resistance

COIL

Power

At Pickup Voltage(typical)

Max. ContinuousDissipationTemperature Rise

at nominal coil voltage

Max. Immersion TimeWeight

58 mW (5-18 V coils)88 mW (24 V coil)

1.3 W at 20°C (68°F) ambient

Packing unit in pcs

NOTES

12°C (22°F) 5-18 V coils17°C (31°F) 24 V coilMax. 130°C (266°F) Class BMax. 155°C (311°F) Class F

1.All values at 20°C (68°F).

2.Relay may pull in with less than “Must Operate” value.3.Specifications subject to change without notice.

Temperature

ZETTLERelectronics GmbH2004-06-02

Tel. +49 89 800 97 0 office@ZETTLERelectronics.com Junkersstrasse 3, D-82178 Puchheim, Germany Fax +49 89 800 97 200 www.ZETTLERelectronics.com元器件交易网www.cecb2b.com

AZ920RELAY ORDERING DATA

COIL SPECIFICATIONS

Nominal Coil

VDC5

69121824

Must Operate

VDC3.5

4.26.38.412.616.8

Max. Continuous

VDC16.5

19.929.839.859.665.0

Coil ResistanceOhm ± 10%

208

3006751,2002,7003,200

ORDER NUMBER*

AZ920–1A–5DEAZ920–1A–6DEAZ920–1A–9DEAZ920–1A–12DEAZ920–1A–18DEAZ920–1A–24DE

* Substitute “-1AB” in place of “-1A” for bifurcated silver nickel contacts. Substitute “-1AH” in place of “-1A for silver tin oxide contacts. Add suffix “A” for gold plated contacts. Add suffix “K” for .3 inch terminal spacing. Add suffix “F” for Class F insulation.

MECHANICAL DATAStandard.799 Max[20.3].209 Max[5.3]\"K\" Version.799 Max[20.3].209 Max[5.3].138[3.5].504 Max[12.8].02[0.5].1[2.54]0.4[10.16]0.2[5.08].049[1.25].028[0.7].138[3.5].504 Max[12.8].035[0.9].012[0.3].02[0.5].1[2.54]0.3[7.62]0.3[7.62].049[1.25].028[0.7].035[0.9].012[0.3]PCB BOARD LAYOUTStandard2x.039[Ø1]2x.047[Ø1.2]WIRING DIAGRAM\"K\" Version2x.039[Ø1]2x.047[Ø1.2].1[2.54].4[10.16].2[5.08].1[2.54].3[7.62].3[7.62]1234Viewed Toward TerminalsDimensions in inches with metric equivalents in parentheses. Tolerance: ± .010\"ZETTLERelectronics GmbH2004-06-02

Tel. +49 89 800 97 0 office@ZETTLERelectronics.com Junkersstrasse 3, D-82178 Puchheim, Germany Fax +49 89 800 97 200 www.ZETTLERelectronics.com